First and foremost, make sure that wiring harness you’ve purchased matches up with the connections inside your dash, and if they don’t match, you have the wrong wiring harness. Before you do anything however, it’s definitely a good idea to open up the dash, unhook the currently installed radio, and familiarize yourself with what you are dealing with. The installation processįor starters, you’ll want to find the proper wiring map for you car, and this information can be found from several great resources, including Wilson Auto Electric, Wiring 4 Cars, and The 12 Volt. Once you’ve got everything you need, you are ready to begin the installation process. For the most part though, this is a very easily adaptable tablet installation process.Īs far as the tools you’ll need is concerned, remember to keep handy a pair of scissors, a small screw driver, wire cutters and strippers, a crimping tool if you already have one, needle nose pliers, and potentially some wrenches and a multimeter, depending on the make and model of your vehicle. ![]() Of course, there will be some differences between your car and the one seen in this video, the Ford F150, and some research and planning of your own is not only recommended, but will actually definitely be required. The Bluetooth adapter is technically optional, but is something I used to be able to connect to multiple devices without needing to open up the dashboard every time to plug it in.įinding the appropriate wiring harness for your car can be either extremely easy or very cumbersome, and I was unfortunately in the latter group. Several cable splicers are also needed, and any option, such as using wire nuts, soldering, or the crimp method, will all do. Also required is an RCA to 3.5 mm adapter, a Bluetooth adapter, a wireless charger, a handful of zip ties, and a wiring harness that is compatible with your car. As you can see, these are already connected because I had performed this installation on my previous vehicle as well, and you can find the details on how to do so here. You’ll also need a 12V socket, a two-port USB car charger, and a fuse tap with a 10A fuse. My choice was the Alpine KTP-455U 4-channel power pack, because it is relatively cheap, and is also perfect for the job, being compact enough to fit inside the dash without any problems. The first thing you’ll need is a small head unit amplifier. ![]() Curious to find out how this is possible? Here is our quick guide on how to install a tablet in your car dashboard! Tools and items required ![]() The entire installation doesn’t take a whole lot of time either, and you can have the setup up and running in just a few hours. A relatively cheaper way to enjoy Android Auto-like features in your vehicle is possible however, as long as you have Nexus 7, or any other 7-inch to 8-inch tablet, handy, and apart from the tablet itself, the remaining tools and requirements will set you back at most $150.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |